Grovtec
![]()
FEATURES:
-1" Loops
-Each set includes needed hardware
-Black-oxide finish
Other Features: Includes 3/4" wood screw with spacer & 1 pair locking swivel
FEATURES:
-1" Loops
-Each set includes needed hardware
-Black-oxide finish
Other Features: Includes 3/4" wood screw with spacer & 1 pair locking swivel
FEATURES:
-1" Loops
-Each set includes needed hardware
-Black-oxide finish
Other Features: Includes 3/4" wood screw with spacer & 1 pair locking swivel
FEATURES
-Two-Piece Band Set
-1" loops
-.800" - .850" tube diameter
FEATURES
-Fits Remington 760's, 7600 & Model Six Pump Actions, 740, 742, 7400, Model Four & other
.22 caliber & centerfire rifles with .645" - .660" diameter barrels
-1" loops
-Black-oxide finish
Set Includes:
-Barrel band
-3/4" rear wood screw stud
-Spacer
-One pair GT Locking Swivels
Other Features: Fits.645"-.660" diameter,
FEATURES
-Two-Piece Band Set
-1" loops
-.630" - .675" tube diameter
Other Features: Fits.630"-.675" diameter, browning & ruger models
FEATURES:
-1" Loops
-Each set includes needed hardware
-Black-oxide finish
Other Features: Includes 3/4" wood screw with spacer & 1 pair locking swivel
FEATURES:
-1" Loops
-Each set includes needed hardware
-Black-oxide finish
Other Features: Includes 3/4" wood screw with spacer & 1 pair locking swivel
FEATURES:
-1" Loops
-Each set includes needed hardware
-Black-oxide finish
Other Features: Includes 3/4" wood screw with spacer & 1 pair locking swivel
FEATURES:
Push button swivel
All steel construction
Extremely durable finish
Tension tested for heavy loads
1-1/4" Loop
Single pack
FEATURES:
No Disassembly of firearm Required for Installation
Fits Mil-Spec Buffer Tubes
3 SLING Mounting Positions
6061 Aluminum Construction
Type III Black Hard Anodized Finished
Other Features: Fits mil spec buffer tubes for push button swivels 3 mounting positions type iii black hard anodized do not need to disassemle rifl
FEATURES
-Two-Piece Band Set
-1" loops
-.700" - .750" tube diameter
FEATURES:
-Standard mag cap replaces factory cap & allows the use of any GrovTec push button swivel or even the
multi-adaptor for speed & versatility in the field
-Each set includes one 12 gauge mag cap & one standard 1-inch loop push button swivel
Other Features: You can use grovtec push button swivels or multi adaptr
FEATURES
-1 1/4" loops
-Black-oxide finish
-For 1 1/4" slings
-Extremely tight machining tolerances
-Stainless steel bases
Other Features: Flush mounting system swivel bases countersunk into stock and glued great for users who remove slings often
FEATURES
-1 1/4" loops
-Manganese phosphate finish
-For 1 1/4" slings
-Extremely tight machining tolerances
-Pull testing to over 300 pounds of pressure
Other Features: Non-glare manganese phosphate finish to eliminate glare
FEATURES
-1" loops
-Black-oxide finish
-For Ruger Carbines, Auto & Single Shot
Set Includes:
-Forend adaptor to fit 10/22, .44 Mag., & No.3 carbines
-1/2" wood screw suitable for forend stock mounting
-3/4" wood screw swivel stud
-One pair GT Locking Swivels
FEATURES
-Type III anodize finish
-Mount bipods using standard swivel studs to Picatinny rails
FEATURES
-Angled loop
-Manganese phosphate finish
-Allows use of MASH or HK style CLASH hooks in push button base
Other Features: Great for mash or hk hooks finish eliminates glare
FEATURES
-Type III anodize finish
-Allows you to mount Picatinny rail accessories to your AR even if you haven't changed out from
your stock AR forearm
-Elongated screw slot will fit a wide variety of hole & slot spacings, which increases the versatility
of the Picatinny mounted accessories
Other Features: Allows you to mount picatinny rail to standard ar forearms elongated screw slot will fit a variety of hole and slot spacing
FEATURES
-For Mossberg 500, 835, 590, 930, 935 & Remington 1100, 12 gauge
-Provides three different ways to mount your sling or accessories:
-Picatinny rail
-Push-button base
-Standard locking swivel stud
-The steel magazine tube mount gives extra security to the 12 gauge extended magazine tube
-Rail & push button base are reversible & can be mounted to either side
Other Features: 3 dif ways to mount slings or access; picatinny rail,push button base & locking swivel stud....Reversible
FEATURES:
-For 1 1/4" slings
-2 pack
-Extremely tight machining tolerances
-Pull tested up to 450 pounds of pressure
-Heavy duty stainless steel
-Non-glare Cerakote™ finish
-Provides rock solid performance under the most demanding conditions
-Made in the USA
Other Features: Non-glare cerakote finish to eliminate glare
FEATURES:
-Size: 1 1/4"
-Stainless steel w/ cerakote
-Desert sand, no-glarefinish
-Tested for up to 450-pounds
Other Features: Non-glare cerakote finish to eliminate glare
FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-3.1", 5 Slot, M-LOK
FEATURES:
-Mount your favorite bi-pod to an M-Lok firearm
-Machined to fit the easy to use M-Lok mounting system
-2.3"
-Black aluminum
FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-6", 15 Slot
-M-LOK
FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-3.8", 9 Slot
-M-LOK
FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-3", 7 Slot
-M-LOK
FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-2.2", 5 Slot
-M-LOK
Other Features: Fits all m-lok handguards
FEATURES
-Steel
-Black-oxide finish
-Converts swivel stud to push button base
Other Features: Attaches the adaptor to the swivel stud, now you can use your push button swivels.
FEATURES
-Black-oxide finish
-Allows for use of standard locking swivels or bipods on Keymod Forearms
FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-3.1", 5 Slot
-Keymod
FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-6", 15 Slot
-Keymod