Lee
![]()
FEATURES
-.452 diameter
-200 grain
-Semi Wad cutternose bullet
-Suitable for cartridges like.45 ACP, .45 Colt
-Handles included
FEATURES
-Quick trim die for 8x57 Mauser
FEATURES
-Aluminum 4-Hole Turret
-For the 4-Hole Turret Press & Classic Turret Press
-Will NOT fit inside the Pro 1000 or 3-Hole Turret Press
FEATURES
-Complete reloading system for.30-30 Winchester &.30 Remington
-Does not include rubber mallet
FEATURES
-Complete reloading system for.270 Winchester
-Does not include rubber mallet
FEATURES
-Complete reloading system for.243 Winchester
-Does not include rubber mallet
FEATURES:
-Includes a full length sizing die, powder through expanding die, easy adjust dead length bullet seating die,
factory crimp die, universal shell holder, powder diper & instructions & load data
-Caliber: 450 Bushmaster
FEATURES
-4 oz. dispenser bottle
-Easy to apply
-Eliminates leading
-Coats the entire bullet for better accuracy
-Dries to a soft, varnish-like finish that really clings
-The dried coating does not degrade gunpowder
FEATURES
-For .280 Remington, 7mm Express
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim
FEATURES
-For .303 British
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim
FEATURES
-For .300 Savage
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim
FEATURES
-For 7mm Remington Magnum
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim
FEATURES
-For .270 Winchester
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim
FEATURES
.375 Ruger
-3 die set
-Full length sizing die
-Easy adjust dead length bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions & load data
FEATURES
-Flat Die Box
-Made of durable red plastic
-Holds 2 dies
FEATURES
-For .457
-Lubricates & sizes cast bullets
-Seats & crimps gas checks
-Fits any standard 7/8x14 thread reloading press
**DOES NOT INCLUDE LUBE**
Other Features: **lube not included**
FEATURES
-For .454
-Lubricates & sizes cast bullets
-Seats & crimps gas checks
-Fits any standard 7/8x14 thread reloading press
**DOES NOT INCLUDE LUBE**
Other Features: **lube not included**
FEATURES
-For .429
-Lubricates & sizes cast bullets
-Seats & crimps gas checks
-Fits any standard 7/8x14 thread reloading press
**DOES NOT INCLUDE LUBE**
Other Features: **lube not included**
FEATURES
-Exclusive balance lever that can't drop down to pinch your fingers
-Unlimited hand clearance that only a "C" frame can offer
-Works equally well with the right or left hand
-Accepts standard 7/8 x14 thread dies and standard universal press shell holders
FEATURES
-For 6.5 Carcano
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim
FEATURES
-For .300 Winchester Short Magnum
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim
FEATURES
-For those who prefer to prime off the press
-Includes new Breech Lock Challenger Press & one Breech Lock quick-change bushing
-Complete powder handling system, Perfect Powder Measure, Lee Safety Scale, Powder Funnel
-Case prep tools include Value Trim Case Trimmer andcutter & lock stud
-Chamfer tool, sizing lube, and small & large primer pocket-cleaning tool included also
Other Features: Kit includes: auto-prime w/shellholder set perfect powder measure safety powder scale case trimmer cutter/lock stud chamfer tool primer pocket cleaner case lubricant
FEATURES
-20 gauge
-Includes 24 shot & powder bushings
-Loads 2 3/4" & 3" shells
Note: This press cannot load 2 1/2" or 3 1/2" shot shells
FEATURES
-12 gauge
-Includes 24 shot & powder bushings
-Loads 2 3/4" & 3" shells
Note: This press cannot load 2 1/2" or 3 1/2" shot shells
FEATURES
-For .50 Browning Machine Gun
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim
Other Features: Requires large cutter comes with shell holder
Other Features: X-press shell holder for app automatic processing press.Allows the case to pass through the shell holder after operations are performed.Fits 6.8 spc, and 224 valkyrie
Other Features: X-press shell holder for app automatic processing press.Allows the case to pass through the shell holder after operations are performed.Fits 40 s&w and 9mm luger
Other Features: X-press shell holder for app automatic processing press.Allows the case to pass through the shell holder after operations are performed.Fits 7.62x54r, and 500 s&w
Other Features: X-press shell holder for app automatic processing press.Allows the case to pass through the shell holder after operations are performed.Fits 44-40, and 45 long colt
Other Features: X-press shell holder for app automatic processing press.Allows the case to pass through the shell holder after operations are performed.Fits 22 ppc, 6 ppc, 7.62x39
Other Features: X-press shell holder for app automatic processing press.Allows the case to pass through the shell holder after operations are performed.Fits 44 spl, 44 mag, 45 colt, and 303 savage