Odin Works

Odin vice block ar10/ar15 upper green

FEATURES
-Green anodized finish
-Works with both AR10 & AR15 uppers
-Quick release pins
-Machined out of 6061 billet aluminum
-Allows you to secure your upper while you clean or install barrels, forends, muzzle devices,
& any accessories you want to mount on your upper

Other Features: Quick release hard anodized pins, used to secure the upper for cleaning or gunsmithing

Odin atlas 6.5 compensator 6.5 grendel 5/8-24

FEATURES
-For 6.5 Grendel
-5/8-24 threading
-Length: 3.06"
-Weight: 4.39 oz.
-Diameter: 1"
-Titanium sleeve
-Core & cap are machined from 416R stainless steel
-3-piece modular design makes installation simple & fast
-No shims or crush washers needed

Other Features: Titanium sleeve, isonited 416r stainless steel, 3.06" long, 4.39 oz, 1" diameter for 6.5mm, 5/8-24 threading

Odin crowfoot 1 3/8" for.308 ar style barrel nuts

FEATURES
-1/2" drive 1 3/8" jumbo crowfoot wrench for your ODIN Works .308 KeyMod Forend installation
-Use to torque the barrel nut to 40-50 ft. lbs.
-NOT compatible with the ODIN Works AR15 KeyMod Forend barrel nut

Other Features: Odin uses 1-3/8" barrel nuts on their 308 barrel nuts

Odin extended charging handle latch red for ar-15

FEATURES:
-Red
-Made from 7075 billet aluminum
-Ergonomic design for easy gripping
-Upgrades any mil spec charging handle

Other Features: Upgrades any mil-spec charging handle, made of billet almuminum,

Odin extended magazine release sig mpx black

FEATURES:
-Allows you to rapidly change mags w/out disrupting your shooting pattern
-Ambidextrous
-Easy to reach
-Ergonomic design
-Contoured for positive depression & reduced slip

Odin bipod adapter m-lok low profile black

FEATURES
-Low profile
-Made from 6061 aluminum
-Black matte anodized
-Designed to maintain repeated grip position
-Compatible with Harris style bipods
-Adjusts in 1/2 slot increments for precise accessory placement
-No access to back side of the rail is required
-Accessories can mount with either end facing forward
-Works with both metal & polymer accessories
-Includes M-LOK nuts, screws & hex wrench
-Length: 2.6"
-Weight: 0.75 oz. (including screws)

Other Features: Allows harris bipods to mount to m-lok rails

Odin arca rail m-lok to arca 9" black

FEATURES:
Length: 9"
M-LOK to Arca
Lightweight design
6061-T6 aluminum
Black Hard Anodized

Odin arca rail m-lok to arca 4" black

FEATURES:
Length: 4"
M-LOK to Arca
Lightweight design
6061-T6 aluminum
Black Hard Anodized

Odin m-lok 5 slot accessory rail black aluminum

FEATURES
-M-LOK 5-Slot Accessory Rail
-2 5/16" long
-Allows you to mount sights, lights, & other tactical accessories to your free float M-LOK forend
-Can be placed at 3, 6 & 9 o'clock positions & can be joined to create continuous Pic Spec rail
-Made from 6061-T6 billet aluminum
-Adjusts in 1/2 slot increments for precise accessory placement
-No access to back side of the rail is required
-Accessories can mount with either end facing forward
-Includes M-LOK nuts, screws & hex wrench

Odin ambidextrous modular safety fde for ar-15

FEATURES:
-Designed to give you better control through a more ergonomic angle
-Configurable up to 8 different orientations featuring the 90 & 45 degree selector barrel

Odin bolt carrier group ar-15 9mm luger black nitride

FEATURES:
-Caliber: 9mm
-Designed to work w/ both Colt & Glock style lowers & magazines
-Also features the traditional style AR extractor that will give you long & reliable use
-Black nitride
-Weight: 14.9 oz.

Other Features: Works with glock and colt lowers and magazines, m-16 style extractor, dust cover compatible

Odin gas tube rifle length for ar-15

FEATURES
-Length: Rifle
-For AR-15
-Stainless

Odin gas tube pistol length for ar-15

FEATURES
-Length: Pistol
-For AR-15
-Stainless

Odin gas tube mid-length for ar-15

FEATURES
-Length: mid-length
-For AR-15
-Stainless

Odin gas tube carbine length for ar-15

FEATURES
-Length: Carbine
-For AR-15
-Stainless

Odin gas block adjustable.936" low profile ar-15

FEATURES:
-Not for use w/ pistol length gas systems & high pressure rounds
-Fits inside all ODIN Works Forends
-Fits .936" diameter barrels
-Made from carbon steel
-Nitride finish
-Inconel adjustment screw & spring
-20 adjustments
-Includes detent ball, cross pin, set screws, & hex wrenches

Odin gas block adjustable.875" low profile ar-15

FEATURES:
-Not for use w/ pistol length gas systems & high pressure rounds
-Fits inside all ODIN Works Forends
-Fits .875" diameter barrels
-Made from carbon steel
-Nitride finish
-Inconel adjustment screw & spring
-20 adjustments
-Includes detent ball, cross pin, set screws, & hex wrenches

Odin gas block adjustable.750" low profile ar-15

FEATURES:
-20 adjustments
-Fits .750" diameter barrels
-Inconel adjustment screw and spring
-Made from carbon steel
-Includes cross pin, set screws, and hex wrenches

Other Features: 20 adjustment clicks, adjustable from the muzzle end

Odin gear ready bag brown holds ar-15 and gear

FEATURES:
-Quick release compression straps
-4 D-ring attachment points
-Key clip
-Loop & hook fasteners
-MOLLE fasteners
-Reinforced Handles
-2 water bottle pockets
-Ambidextrous shoulder strap
-Locking buckle
-Dividing panels that separate an AR upper & lower
-Water bladder pouch & hole for hose
-Pocket extender: Can remain in bag as a pocket or extend up through the zipper to fit longer barrels

Odin gear ready bag black holds ar-15 and gear

FEATURES:
-Quick release compression straps
-4 D-ring attachment points
-Key clip
-Loop & hook fasteners
-MOLLE fasteners
-Reinforced Handles
-2 water bottle pockets
-Ambidextrous shoulder strap
-Locking buckle
-Dividing panels that separate an AR upper & lower
-Water bladder pouch & hole for hose
-Pocket extender: Can remain in bag as a pocket or extend up through the zipper to fit longer barrels

Odin vice block ar10/ar15 upper red

FEATURES
-Red anodized finish
-Works with both AR10 & AR15 uppers
-Quick release pins
-Machined out of 6061 billet aluminum
-Allows you to secure your upper while you clean or install barrels, forends, muzzle devices,
& any accessories you want to mount on your upper

Other Features: Quick release hard anodized pins, used to secure the upper for cleaning or gunsmithing

Odin stock zulu 2.0 w/padded buffer tube red for ar-15

FEATURES:
-Made from 6061 aluminum & Limbsaver recoil pad
-Secondary Buffer System
-Reduces Recoil
-Weight: 1.23 lbs
-Includes: ZULU Adjustable Stock - Padded Intermediate Buffer Tube - Ambi Sling/QD Plate

Odin stock zulu 2.0 w/padded buffer tube fde for ar-15

FEATURES:
-Made from 6061 aluminum & Limbsaver recoil pad
-Secondary Buffer System
-Reduces Recoil
-Weight: 1.23 lbs
-Includes: ZULU Adjustable Stock - Padded Intermediate Buffer Tube - Ambi Sling/QD Plate

Odin stock zulu 2.0 w/padded buffer tube black for ar-15

FEATURES:
-Made from 6061 aluminum & Limbsaver recoil pad
-Secondary Buffer System
-Reduces Recoil
-Weight: 1.23 lbs
-Includes: ZULU Adjustable Stock - Padded Intermediate Buffer Tube - Ambi Sling/QD Plate

Odin buffer adjustable ar-15 lite 2.1 oz to 4.2 oz aluminum

FEATURES:
-AR15
-Aluminum
-Comes w/ 3 aluminum, 3 stainless & 1 tungsten weight (2.1oz - 4.2oz)

Other Features: Comes with 3 aluminum, 3 stainless steel and 1 tungsten weight.Lite buffer is made from aluminum

Odin buffer adjustable ar-15 heavy 3.7 oz to 5.8 oz s/s

FEATURES:
-AR15
-Stainless steel
-Comes w/ 3 aluminum, 3 stainless & 1 tungsten weight (3.7oz - 5.8oz)

Other Features: Comes with 3 aluminum, 3 stainless steel and 1 tungsten weight.Heavy buffer is made from stainless steel

Odin buffer adjustable ar-10 3.45 oz to 4.65 oz s/s

FEATURES:
-AR10
-Stainless steel
-Comes w/ 1 aluminum, 1 stainless & 1 tungsten weight(3.45oz - 4.65oz)

Other Features: Comes with 1 aluminum, 1 stainless steel and 1 tungsten weight.

Odin buffer adjustable ar 9mm 5.4 oz to 7.4 oz s/s

FEATURES:
-Caliber: 9mm
-Stainless steel
-Comes w/ 1 aluminum, 1 stainless & 3 tungsten weights(5.4oz - 7.4oz)

Other Features: Comes with 1 aluminum, 1 stainless steel and 3 tungsten weights.

Odin atlas 9 compensator 9mm 1/2-28

FEATURES:
-For 9mm AR builds
-1/2-28 threading
-Core & cap are machined from 416R stainless steel & black nitrided while the sleeve is made from
titanium.
-Timing & tuning is done w/ the titanium sleeve, no shims or crush washers needed
-Length:2.5"
-Weight: 3.9 oz

Other Features: Titanium sleeve, isonited 416r stainless steel, 2.56" long, 3.9 oz, 1" diameter for 9mm ar builds, 1/2-28 threading

Odin atlas 7.62 compensator 7.62 (30 cal) 5/8-24

FEATURES
-For 7.62(.30 cal.)
-5/8-24 threading
-Length: 3.06"
-Weight: 4.39 oz.
-Diameter: 1"
-Titanium sleeve
-Core & cap are machined from 416R stainless steel
-3-piece modular design makes installation simple & fast
-No shims or crush washers needed

Other Features: Titanium sleeve, isonited 416r stainless steel, 3.06" long, 4.35 oz, 1" diameter for 7.62 (30) caliber, 5/8-24 threading

Odin atlas 5 compensator 5.56 (223 cal) 1/2-28

FEATURES
-For 5.56 (.22 cal.)
-1/2-28 threading
-Length: 2.56"
-Weight: 4.1 oz.
-Diameter: 1"
-Titanium sleeve
-Core & cap are machined from 416R stainless steel
-3-piece modular design makes installation simple & fast
-No shims or crush washers needed

Other Features: Titanium sleeve, isonited 416r stainless steel, 2.56" long, 4.1 oz, 1" diameter for 5.56 (22 cal), 1/2-28 threading

Odin forend o2 lite mlok 9.5" black ar-15

FEATURES:
-9.5" M-LOK forend
-Free float
-Engineered w/ advanced ergonomics for comfort & improved performance
-Accessory rails can be placed at 3, 6 & 9 o'clock positions & can be joined to create continuous Pic Spec
Rail.
-Four or more QD attachment points
-Made to fit Magpul QD
-Engineered to allow for low profile gas block to fit inside

Other Features: Includes one 5 slot accy rail