RCBS

Rcbs universal hand priming tool w/universal shellholder

FEATURES
-Combines the universal shell holder from the APS® tool with the primer tray
from the standard toolto offer unmatched performance
-Accepts cases from .32 ACP to .45-70 Government
-The safety gate isolates the primer seating operation from the primer supply to
reduce the risk of tray detonation
-The removable primer tray orients their primers for use & will fit any manufacturer’s
primer packaging
-Includes accessories to seat large & small rifle or pistol primers

Rcbs fl die set.22-250 gp-a

FEATURES
-Caliber: .22-250
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs collet for bullet puller.338 caliber

FEATURES
-Caliber: .338 Cal
-This collet is designed to be used with the RCBS® Standard Bullet puller to remove bullets from a wide
range of cases

Rcbs rockchucker supreme master reloading kit
Other Features: Kit contains rock chucker supreme press,.17-.60 debur tool, accessory handles with 2 case neck brushes, m500 mechanical scale.Uniflow iii powder measure, hand priming tool, universal case loading block, hex key set, case lube kit, powder funnel, speer reloading manual

Rcbs stuck case remover

FEATURES
-Extracts stuck cases from standard sizer dies without damaging the die
-Uses a very simple two-step removal process

Rcbs rebel single stage press master reloading kit
Other Features: Kit contains: rebel press, uniflow-iii powder measure, 1500 grain digital scale, hand priming tool, power pull bullet puller kit speer #15 manual, fold up hex key set, primer pocket brushes , deburring tool, case loading block, case spray lube, 2 case neck brushes, powder funnel.

Rcbs vibratory case polisher 120vac 14lbs.Capacity
Other Features: Sifter lid

Rcbs case cleaner concentrate 1 quart makes 10 gallons

FEATURES:
-Use w/ Ultrasonic & Rotary style case cleaner/polishers
-Removes tarnish, carbon buildup & metal oxides from cartridge cases
-Non-corrosive/non-combustible
-Thoroughly cleans brass cases
-Concentrated - one quart makes 10 gallons of solution
-Contains anti-tarnish additive to keep cases looking shiny & new

Other Features: For rotary and ultrasonic case cleaners

Rcbs fl die set 6.5 wby rpm

Rcbs small base die set.308 winchester

FEATURES:
-.308 Win.
-Forbottleneck type cases used in tight-chambering semi-automatic, pump or lever-action rifles
-Consists of a Small Base Sizer with an Expander-Decapping Unit & Regular Seater Die with Seater Plug
-The sizer resizes cases below SAAMI minimums, reducing the shoulder & body by a few thousandths
-It also deprimes the case
-The Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated
-To seat bullets without crimping, simply unscrew the die until the crimp ring no longer engages the case
mouth

Rcbs fl die set.308 win.Gp-a

FEATURES
-Caliber: .308 Winchester
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.300 win.Mag.Gp-a

FEATURES
-Caliber: .300 Winchester Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.30-30 win.Gp-a

FEATURES
-Caliber: .30-30 Winchester
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs shell holder #4

FEATURES
-Shell Holder #4
-Built from hardened steel
-Designed to properly align the case with the reloading die in single-stage & turret presses
-Sized to fit specific case heads & capture 0.125" of the case head for proper SAAMI head spacing

Rcbs shell holder #38

FEATURES
-Shell Holder #38
-Built from hardened steel
-Designed to properly align the case with the reloading die in single-stage & turret presses
-Sized to fit specific case heads & capture 0.125" of the case head for proper SAAMI head spacing

Rcbs quick change powder measure w/large & small drums

FEATURES
-Allows reloaders to quickly convert from light pistol to magnum rifle charges
-Includes a drain attachment & small & large metering assemblies
-Quick Change parts can be used to upgrade existing Uniflow™ Powder Measures
-The hopper holds 1 pound of smokeless powder
-Metering assemblies change without the pull of a pin

Note: The Powder Measure should be used in conjunction with an accurate powder scale for setting the original charge & for checking charges occasionally during the run

Rcbs fl die set.303 british gp-a

FEATURES
-Caliber: .303 British
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs shell holder #32

FEATURES
-Shell Holder #32
-Built from hardened steel
-Designed to properly align the case with the reloading die in single-stage & turret presses
-Sized to fit specific case heads & capture 0.125" of the case head for proper SAAMI head spacing

Rcbs neck sizer die only 6.5 creedmoor

FEATURES
- Caliber: 6.5 Creedmoor
- The Neck Sizer Die features an Expander-Decapping Unit.
- It resizes the case neck only ( it doesn't touch the shoulder or body) and de-primes

Rcbs carbide roll crimp die set.45 long colt gp-b

FEATURES
-Caliber: .45 Long Colt
-For straight-wall rifle & pistol cases
-The Carbide Sizer Die sizes the case & de-primes (the carbide sizer ring eliminates the need to lubricate).
-The Expander Die expands the case to the proper diameter to accept the bullet, & imparts case
mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

Rcbs standard roll crimp die set.44-40 winchester gp-b

FEATURES
-Caliber: .44-40 Winchester
-The 3-Die Roll Crimp Set is for loading straight-wall cartridges
-Its steel Sizer Die sized the case & de-primes
-Note: Cases must be lubricated
-The Expander Die expands the case to the proper diameter to accept the bullet, & it imparts
case mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

Rcbs small base die set.243 winchester

FEATURES:
-For bottleneck cases used in tight-chambering semi-automatic, pump or lever-action rifles.
-The set consists of a Small Base Sizer Die w/ an Expander-Decapping Unit and REgular Seater Die w/ Seater Plug
-The sizer resizes cases below SAAMI minimums, reducing the shoulder & body by a few thousandths
-It also de-primes the case
-The included Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated
-To seat bullets w/out crimping, simply unscrew the die until the crimp ring no longer engages the case
mouth
-.243 Remington

Rcbs fl die set.221 fireball gp-a

FEATURES
-Caliber: .221 Fireball
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.338 win.Mag.Gp-a

FEATURES
-Caliber: .338 Winchester Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.223 wssm gp-a

FEATURES
-Caliber: .223 Winchester Super Short Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set 6mm creedmoor gp-d

FEATURES:
-Intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die w/ an Expander-Decapping
Unit, & a Seater Die w/ Bullet Seater Plug
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs group-c taper crimp die.350 legend

Rcbs fl die set.35 remington gp-a

FEATURES
-Caliber: .35 Remington
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs 3 die set w/roll crimp.444 marlin gp-c

FEATURES
-Caliber: .444 Marlin
-The 3-Die Roll Crimp Set is for loading straight-wall cartridges
-Its steel Sizer Die sized the case & de-primes
-Note: Cases must be lubricated
-The Expander Die expands the case to the proper diameter to accept the bullet, & it imparts
case mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

Rcbs small base sizer die only.308 winchester

FEATURES
- Caliber: .308 Winchester
- The Small Base Sizer Die is for bottleneck type cases used in tight-chambering semi-automatic,
pump or lever-action firearms.
- The sizer resizes cases below SAAMI minimums, reducing the shoulder & body by a few thousandths.
- It also de-primes the case.
- Note: Not recommended for ammunition used in bolt-action rifles

Rcbs uniflow-iii powder measure
Other Features: The uniform-iii powder measure is the most accurate uniflow that rcbs has ever made.Throws consistently accurate charges reload after reload.

Rcbs model m500 reloading scale 505 grain capacity

FEATURES
-505-grain capacity
-Accurate to within 0.1 grain
-Right- or left-handed operation
-Two-poise design
-Magnetic dampening
-Leveling foot
-Ambidextrous metal scale pan
-Grain-to-gram conversion chart