Magazine Accessories

Xs remington 12ga magazine tube detent swage

Beretta snap grip px4 sub- compact 9mm/.40 extended black

FEATURES:
-For PX4 sub compact Storm magazines
-Ensures maximum grip area

Mountain tactical tikka t3/t3x single shot follower
Other Features: Tikka t3/t3x single shot follower, long lasting delrin for a lifetime of use, works and fits all calibers

Ghost moab mag extension for glock 19-33 plus 4 rnds black
Other Features: Adds 4 rounds to glock 19/23/ 26/27/32/33, extra power spring

Ghost magazine extension kit glock 17 gen 1-4 plus 3 rnds

FEATURES
-Pinky rest giving you full grip
-Stainless steel magazine spring
-Super duty design
-Uses existing magazine base plate

Other Features: Adds 3rds to 9mm &.40s&w, adds 2rds to.45gap, drop in for gens 1-4, maritime base plate.Fits glock 17, 17l, 18, 22, 31, 34, 35, and 37

Lancer shotgun extension tube benelli m1/m2/sbe/sbe2 plus6

FEATURES
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-The LSX-6X adds six rounds to magazine's capacity

Other Features: Extra long spring included that needs cut to length, plus 6 rounds, length 14.7"

Pearce grip frame insert for glock gen 4 full & mid-size

FEATURES
-Grip Frame Insert for Glock Mid & Full Size Models
-Fits M17, 18, 19, 22, 23, 24, 31, 32, 34, 35, 37, & 38
-Only fits new Generation 4 frames
-Will not fit 20 & 21 models
-Allows for use of factory interchangeable backstraps
-Helps keep debris out of the magazine well

Other Features: Does not fit g29 or g30

Pearce grip extension for s&w m&p shield plus 9mm/.40s&w
Other Features: Adds 3/4" additional length, fits s&w m&p shield plus 9mm & 40 s&w, does not add to mag capacity

Pearce grip extension for springfield xd 9mm &.40sw

FEATURES
-Grip extension for Springfield XD 9mm, .357 Sig, & .45 Gap (sub-compact, compact & full size)
-Replaces the original base plate
-Does not alter the capacity of the magazine
-Adds approximately 5/8" additional length

*Will NOT fit .45 ACP models, or XDM frames

Other Features: Fits xd in 9mm,.40sw/.357 sig and.45 gap will not fit xdm models will not fit.45acp models

Hexmag black grip tape 46 hex shapes for hexmags

FEATURES
-Black
-One sheet (46 hex shapes) is enough to cover both sides of one Hexmag if you fill every hex shape
of the magazine
-Will cover 50% of two Hexmag magazines
-Waterproof
-Provides additional gripping power in any environment - wet or dry
-The Grip Tape is die-cut & self-adhesive to fit into & fill the hex-shaped cavity of the Hexmag magazine
& Advanced Tactical Grip
-Simply clean the surface of your Hexmag magazine or Advanced Tactical Grip to remove all oils & dirt,
apply Grip Tape & press firmly
-Some light heat may be applied to set the Grip Tape in teh step of the magazine

Other Features: 46 hex shapes, enough to cover both sides of one hexmag magazine.

Ruger 10/22 magazine dust covers 3-pack

FEATURES:
-Designed for your Ruger® BX-1, BX-15 & BX-25 Ruger® rotary magazines.

Hk vp9/p30 magazine conversion kit 15rd to 17rd black
Other Features: Converts vp9/p30 15rd magazines to 17rd magazines

Lancer shotgun extension clamp picatinny rail one side

FEATURES
-Shotgun Extension Clamp for use with the LSX Shotgun Extension Tube
-The two aluminum clamping halves have high temperature silicone foam pads to ensure a
slip free connection with the carbon-fiber tube and shotgun barrel
-The clamping halves are held together with steel cap head screws
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-Also recommended for Remington applications due to the shallow threading on the
Remington magazine tubes
-Rail on one side

Pearce grip extension for glock 42

FEATURES
-Replace the magazine base plate & retain all other factory components.
-Adds approximately 3/4" of additional length

Other Features: Adds 3/4" additional length, fits glock 42

Lancer shotgun extension tube mossberg 590/930 plus6

FEATURES
-Adds 6 rounds to capacity
-Length: 14.5"
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel

Other Features: Extra long spring included that needs cut to length, plus 6 rounds, length 14.5"

Pearce plus magazine extension for glock 20/21/29/40/41

FEATURES
-Replaces the magazine floor plate adding two rounds capacity to Glock factory
M20, M21, M29, M40 & M41 magazines
-Used on high capacity magazines only, it will not work on the 10-round M20 & M21 magazines
-Not for use on Glock M30 10-round magazines
-Works on 3rd & 4th Generations
-Works on Glock M30 9-round magazines, enabling the magazine to hold 11 rounds
-Made from High Impact Polymer & withstand temperatures from -20F to 350F

Other Features: For use on high cap mags only adds 2 rounds to capacity, this product will work on 9 round glock 30 magazines, not for use on model 30 10-round magazines

Pearce grip extension for springfield xd45

FEATURES
-Replace the magazine base plate & retain all other factory components.
-Adds approximately 5/8" of additional gripping surface
-Blends with the contours & texture of the handgun giving a factory appearance
-Made from High Impact Polymer & withstand drop tests at temperatures from -20F - 350F

Pearce grip extension for glock 43

FEATURES
-Replace the magazine base plate & retain all other factory components.
-Adds approximately 3/4" of additional length
-Slightly longer than the one provided by the factory and incorporates the factory texture pattern
as well as an ergonomic curve for better grip

Other Features: Adds 3/4" additional length, fits glock 43

Pearce magazine grip extension kahr mk9/k9/e9/k40 (2 pk)

FEATURES
-Grip extension for Kahr 9/40 Compacts
-Replaces the original base plate & internal locking plate
-Does not alter the capacity of the magazine
-Adds approximately 5/8" additional length

Pearce grip extension plus for glock 43

FEATURES
-Replace the magazine floor plate providing one extra round of capacity
-Will add 3/4" additional length
-Fits Glock 43

Other Features: Adds 3/4" in length, plus one capacity, fits glock 43

Pearce magazine extension plus for glock 26 27 33 39

FEATURES
-Grip extension for Glock 26/27/33/39
-Replaces the magazine base plate & internal floor plate
-Adds 2 rounds to the Glock 26 /1 round to the Glock 27 & 33 / 0 rounds to the Glock 39
-Adds 5/8" additional length
-Blends with the contours & texture of the handgun, giving a factory appearance
-Made from high impact polymer

Other Features: Increases 9mm by 2 rounds increases.40sw by 1 round

Magpul pmag maglink fit 5.56 gen m2moe and gen m3 pmags

FEATURES
-Fits 5.56x45 PMAG 30 & 40 round AR/M4 GEN M2 MOE® and AR/M4 GEN M3™ magazines*
-Impact resistant polymer construction provides light weight & resists operational abuse
-Wide-set, two-piece bolt-on design resists flexing
-Integral grooves interface with PMAG ribbing to eliminate slippage

*Note: This MagLink is NOT compatible with first generation PMAGs (with Black follower, circa 2007-2009), 10 or 20 round PMAGs, custom branded PMAGs, or any other non AR15/M4 specific Magpul magazine such as the EMAG®, PMAG 30G, or PMAG 30 AUS. Will also not fit other larger caliber magazines such as 7.62x39 & 7.62x51 PMAGS or any metal magazine.

Other Features: Fits magpul pmag gen m2 moe and gen m3

Fn magazine compact grip extension fns-9c and fns-40c

FEATURES:
-Designed for FNS™ compact
-Can be used with any FNS™ 9MM and .40 S&W magazine
-Provides an additional 3/4" of front strap grip space

Other Features: Fits fns compact models, provides an additional 3/4" of gripping surface

Grey ghost triple mag panel 5.56 mag pouch laminate coyote
Other Features: Features laminate nylon and will hold 3-30rd m16 style magazines.Open top design includes a bungee strap to allow for silent mag removal.Slots on front and back allow the user to stack other modular pouches on top of it.Attaches to molle/pals style webbing with malice clips.

Grey ghost triple mag panel 5.56 mag pouch laminate black
Other Features: Features laminate nylon and will hold 3-30rd m16 style magazines.Open top design includes a bungee strap to allow for silent mag removal.Slots on front and back allow the user to stack other modular pouches on top of it.Attaches to molle/pals style webbing with malice clips.

Mag storage solutions pistol mag holder

FEATURES:
-Store & Organize Pistol Magazines & Ammunition
-Consumer Adjustable Dividers w/ 60 adjustment slots
-Ideal for most standard pistol magazines .22 thru .45 cal
-Magazine round count indicator windows are commonly visible
-Each Unit comes w/ 16 Magazine Dividers

Other Features: 16 adjustable dividers reinforced mounting holes magnet kit sold seperately

Kriss magex2 kit glock 17 9mm 40 round does not include mag

FEATURES:
-Made up of the extended baseplate, outer sleeve, & extended spring, constructed of durable & lightweight
reinforced composites
-40 round capacity

Other Features: Magazine extender converts standard glock 17 magazines into 40rd magazines.Only works with genuine glock 17 high capacity magazines.Magazine not included.

Lancer shotgun extension tube rem.870/1100/versamax plus2

FEATURES
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-The LSX-2X adds two rounds to magazine's capacity

Other Features: Extra long spring included that needs cut to length, plus 2 rounds, length 7.8" some rem.Shotguns require minor modification of the shotguns magazine tube, two indents/tabs must be removed for proper operation

Pearce grip extension for glock 29 & 30

FEATURES
-Replace the magazine base plate & retain all other factory components.
-Adds approximately 1/2" of additional length
-Blends with the contours & texture of the handgun giving a factory appearance
-Made from High Impact Polymer & withstand drop tests at temperatures from -20F - 350F
-They form the next logical finger positioning feature to provide control & comfort without sacrificing concealablility

Lancer shotgun extension clamp picatinny rail both sides

FEATURES
-Shotgun Extension Clamp for use with the LSX Shotgun Extension Tube
-The two aluminum clamping halves have high temperature silicone foam pads to ensure a
slip free connection with the carbon-fiber tube and shotgun barrel
-The clamping halves are held together with steel cap head screws
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-Also recommended for Remington applications due to the shallow threading on the
Remington magazine tubes
-Rail on both sides

Cruxord magazine base plate spartan fits most glocks

FEATURES:
-Spartan Magazine Base Plate
-Aluminum
-Fits Glock 17/19/22/23/24/26/27/31/32/33/34/35
-Gen1-4

Other Features: Glock 17/17l/19/22/23/24/26/ 27/31/32/33/34/35, made in usa

Ruger extended floorplate/ grip extension lc9 black

FEATURES:
-For the Ruger® LC9® & LC9s® only
-Extended floorplate
-Polymer