Tools

Odin crowfoot 1-3/16" for odin ragna barrel nuts

FEATURES:
-1/2" drive 1 3/16" jumbo crowfoot wrench for your ODIN Works Ragna Forend installation
-Use this crowfoot wrench to torque the barrel nut to 40-50 ft lbs.

Other Features: For odin ragna barrel nuts and any barrel nut that uses a 1-3/16" wrench

Real avid smart bench block non-slip magnetic

FEATURES:
-Embedded magnet holds small pins securely
-Universal holes sizes accommodate most pin removals
-Non-slip outer ring steadies block during use
-Central groove steadies barrels
-Work surface made of ultra-tough engineering resin
-1911 government model barrel bushing wrench on back side

Other Features: Universal holes sizes for most pin removals central groove steadies barrel 1911 govmnt bbl bushing wrench non-slip outer ring

Xs armorers block ar platform fits most ar uppers gen2
Other Features: Fits ar-15/ar-10/sr25/dpms g2, and most other ar pattern uppers, box packaging

Truglo pistol-tec armorer's block

FEATURES:
-Bright Green CREE™ LED
-300 lumen output
-Machined aircraft-grade aluminum
-Operates on included 18650 rechargeable battery
-Pressure switch included
-Includes scope mounting kit, AC/DC charger & carry case

Other Features: Pistol-tec armorer's block

Truglo glock front/rear sight tool

FEATURES:
-Front & rear sight installation tools for Glock® pistols
-Remove, install or adjust factory or after-market sights
-Approved for use w/ tritium night sights
-Compatible w/ suppressor height sights

Warne universal scope level for 34mm tubes

FEATURES:

Finish	Black
Material	Aluminum
Tube Diameter	34mm
Hand	Ambidextrous
Weight	0.09 oz

Other Features: Scope level for 30mm scopes

Lyman mechanical trigger pull gauge 0-12 lbs

FEATURES:
Reads from 0 to 12 pounds
2-ounce increments
Highest weight indicator
Aluminum and steel construction
“T” handle and hanging loop for storage

Other Features: 2 ounce incremenys redas from zero to 12 pounds.Highest weight indicator.Aluminum and steel construction.T handle and hanging loop for storage.

Real avid 2-in-1 tool for glock disasembly & front sight

FEATURES:
Easily remove pins to disassemble your Glock to clean, modify or maintain
Precision-knurled driver to easily install or remove stock and aftermarket front sight
3mm Armorer's pin punch fits all Glock pin sizes
O - rings keep the protective cap in place
3/16" magnetic hex nut driver fits stock and aftermarket front sight
Key ring
Flat Black cap allows firm pressure on sticky pins without discomfort to hand
Reversible dual function tool knurled for no-slip grip

Other Features: 3mm pin punch 3/16" hex nut driver

Real avid carbon boss ar15 carbon scraper multi tool

FEATURES:
-Firing pin large diameter scraper
-Bolt tail exterior scraper
-Behind-cartridge extractor scraper
-Firing pin small diameter scraper
-Bolt tail shoulder scraper
-Cotter pin puller
-Bolt cam pin scraper
-Bolt waist scraper
-1/4" bit driver
-Bolt carrier scraper (2)
-Between bolt lugs scraper
-Bolt tail interior scraper
-Bolt face scraper

Other Features: Cleans carbon from 12 critical surfaces on the bolt, cam pin bolt carrier, and firing pin

Real avid smart lock bore guide & pivot lock tool

FEATURES:
-Solvent application slot
-Chemical resistant, non-marring industrial resin construction
-Upper pivot lock arm
-Protects chamber & bore throat from damage while cleaning
-Keeps AR15 upper locked open at optimum angle for bore cleaning
-Restricts solvent leakage & keeps gunk out of the action
-Perfectly aligns cleaning rod & cleaning tips w/ barrel

Other Features: Ar15 pivot lock to hold upper open during cleaning pivot lock tool securely holds upper open while cleaning star chamber

Grace usa glock punch 3/32" punch w/wood handle

FEATURES
-Grace USA 3/32"pin punch with J Series wood handle
-Perfect palm fit punch for Glocks & other firearms that require a 3/32" pin punch
-Made in the USA

Other Features: Made in the usa

Grace usa gun care tool kit set of 17 tools

17-Piece Gun Care Tool Set Includes:
-8-Piece Original Gun Care Screwdriver Set
-8-Piece Brass Pin Punch Set
-Sizes 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16"
-8 oz. Brass Hammer
-Compact zipper case (12" x 9" x 1.5") made from durable, soft Nufak

Other Features: Made in the usa, includes 8 pc gunsmith screwdriver set, 8 pc brass pin punches, 8oz brass hammer, & vinyl case

Grace usa hammer 4 oz brass

FEATURES
-4 oz.
-Precision manufactured
-Hand assembled within the USA
-Brass head is hand turned from CDA 360 brass rod, extruded in a USA mill & beautifully hand polished
-Hickory handle is pressed into the finished brass head & securely brass pinned

Other Features: Made in the usa

Odin vice block ar10/ar15 upper red

FEATURES
-Red anodized finish
-Works with both AR10 & AR15 uppers
-Quick release pins
-Machined out of 6061 billet aluminum
-Allows you to secure your upper while you clean or install barrels, forends, muzzle devices,
& any accessories you want to mount on your upper

Other Features: Quick release hard anodized pins, used to secure the upper for cleaning or gunsmithing

Lyman electronic caliper s/s 6"

FEATURES
-Direct digital readout
-Switch from inches to millimeters with the touch of a button
-Hold setting plus On/Off switch
-Accurate to .001"/0.1mm
-Storage case included

Other Features: Includes storage case on/off switch switch from inches to mm with a touch of a button

Wheeler trigger pull gauge digital

FEATURES:
-Ergonomic over-molded design
-0-12 lbs. range
-+/- 2% accuracy
-Load sensor directly contacts the trigger
-Feature max, min, average, & live functions
-Audible indicator tone
-Low battery indicator
-Soft touch buttons
-Arm folds inside housing to protect the load sensor when not in use
-Foam lined storage case

Other Features: Accurately measures trigger pull weight, 0-12lbs range, +/-.1oz accuracy

Wheeler universal barrel clamp

FEATURES
-Precision extruded from aircraft grade aluminum
-Bonded with non-marring urethane
-The urethane provides a protective layer for the barrel's finish while providing extraordinary gripping abilities
-Three different barrel openings: .85", .66", .53"
-Will accommodate anything from an AR pencil barrel up to a bull barrel

Real avid smart drive 90 pce gunsmithing kit w/ force ast

FEATURES:
-The main driver features a magnetic bit holder, rubber grip, jeweler's spin top & 360° LED light
-It partners w/ the small "close quarters" driver to create Force Assist™
-Force Assist is a proprietary system that helps users to loosen frozen-in-place screws as well as precisely
tighten screws

Other Features: 87 standard & metric blk oxide coated bits large driver w/ led light small driver scope turret tool magnetic parts tray hard case

Wicked tree gear replacement blade hand saw 7" wood!

FEATURES
-Replacement blade for Wicked Tough Hand Saw
-7" Blade
-Sharp Impulse hardened high carbon steel

Other Features: Sharp impulse hardened high carbon steel,7" blade

Warne universal scope level for 1" tubes

FEATURES:

Finish	Black
Material	Aluminum
Tube Diameter	1"
Hand	Ambidextrous
Weight	0.09 oz

Other Features: Scope level for 1" scopes

Warne tool 1/4" drive torque 65in lbs for tactical rings

FEATURES
-½” socket
-Preset at 65 in/lb
-Audible beep & red light illuminated when proper torque is met

Other Features: 1/4" drive, 1/2" socket included, preset at 65 in/lb, audible beep and red light illuminated when torque is met

Warne range tool
Other Features: Range tool

Wheeler screwdriver kit 43-pc professional gunsmithing

FEATURES:
-Made from high-grade steel
-A custom-molded box houses the contents of the set
-1 ergonomic driver handles for delivering maximum torque
-21 hollow ground bits specifically designed to match the thin slots in gun screws, sizes ranging from
approx. .120 x .020 to .360 x .070
-10 Allen bits
-4 Phillips bits
-5 Torx bits
-Note: the bits in these sets are designed to break before damaging the fastener itself. Breakage of a bit
shouldn't be considered a defect, rather it means that the fastener will require some other means of
removal or an application of a suitable compound that will penetrate threads, such as Kano Kroil

Other Features: Case included, 20 flat bits, 10 hex bits, 5 torx bits and more.

Real avid core gun tool ar15's carry multi-tool carabiner

FEATURES:
World’s most comprehensive carbon scraper
Cleans carbon from all critical surfaces to keep bolts cycling smoothly
Clear jams
Punch takedown pins
Make sight adjustments
Heavy-duty Liner-Locks keep tools secure in use
Carabiner-like function secures to molle straps

Other Features: A2 front sight adj 4-prong takedown punch bolt override cord cutter carrier scraper scope turret adjuster firing pin scraper bolt & bcg scraper 12-function 9/64", 3/16" hex t10, t15

Real avid master fit a2 crowfoot wrench set 5 pieces
Other Features: Torq wrench w/ 5 nut wrenches free float barrel nut wrench 3/4" muzzle devise wrench 5/5" muzzle/a2 buttstock exten tube wrench extended/stand castle wrench

Real avid master fit 1-1/8" free float barrel nut wrench
Other Features: Torq wrench

Truglo ar-15 sight tool 4/5 prong

Truglo glock mag-wrench disassembly tool glock 42/43

FEATURES:
-Removes GLOCK® factory magazines
-Easily change base plates & replace springs
-Compatible w/ GLOCK® 42/43 single stack magazines w/ factory finger extension
-Made from machined aircraft aluminum

Other Features: Removes glock factory magazines, easily change base plates and replace springs, compatible with glock 42/43 single stack magazines with factory finger extension, made from machined aircraft aluminum, also works with double stack mags

Truglo glock channel liner combo tool
Other Features: Glock channel liner combo tool

Truglo glock front sight tool

FEATURES
-Easily removes/installs Glock front sights

Wheeler 21-pc add on kit for screwdriver kits

FEATURES
-Great addition to the 72 or 89piece Screwdriver Sets
-Hollow ground flat bits
-Durable S2 tool steel
-Features plastic storage tray
-½” x ¼” socket driver
-2.5mm, 3mm, 3.5mm, 4mm, 4.5mm,4.5mm 5mm, 5.5mm, 6mm, 7mm,and 8mm Hex Bits
-T6, T7, T8, T9, T10, T15, T20,T27, T30 Torx Bit

Other Features: Great addition to the 72 & 89 piece screwdriver sets, includes metric hex bits, torx bits, and a storage tray

Real avid gun tool pro 30 in one shooters multi-tool

FEATURES
-Removable magnetic storage compartment
-14 firearm-specific Torx, Allen, Phillips, and flat drivers/bits
-2.5" raptor claw point knife blade
-Choke wrench fits 6 gauges: .410-10
-1/4" bit driver
-1/4" bit wrench for extra torque
-Scope turret tool
-Two metal files
-Lanyard loop
-Tap hammer
-Pin punch

Other Features: 30 frequently used tools in one multi-tool removeable magnetic storage includes torx, phillips, flat bits, and pin punch fine & ultra fine meetal files scope turret tool univ choke wrench 12 ga-410 ga claw point utility knife